The PUMP UNIT EXCHANGER BBR100 is equipped with a support base with lifting handle.
The self-priming pump transfer is constructed of 316 stainless steel with stainless steel impeller with VITTON seal to operate at high temerature.
The electric starter is mounted directly on the pump. The power is 0.2 Hp.
The heat exchanger is made of 316 stainless steel and is equipped with 40 plates with a length of 315 mm
The heat exchanger is oversized to allow a very good cooling of the must and ensure a proper fermentation process
The PUMP WITH HEAT EXCHANGER BBR100 is used for multiple applications:
washing-spent grain, sucking the water for sparging directly from the boiler and inserting it in the kit WASH trebbie
Cooling of the must-aspirating the liquid from the drain cock BEER MACHINE BBR100 and after passing the wort, enter it directly in the fermenter
-cleaning of the heat exchanger and by recirculating the water mixed with detergent.
-is used for the cooling of the wort before fermentation.
The heat exchanger has two physically separate circuits, in which input will be made to pass, respectively, cooling water and hot wort. From the exit of the heat exchanger cool the wort and the water heated.